gadgets ಲೇಬಲ್‌ನೊಂದಿಗೆ ಪೋಸ್ಟ್‌ಗಳನ್ನು ತೋರಿಸಲಾಗುತ್ತದೆ. ಎಲ್ಲಾ ಪೋಸ್ಟ್‌ಗಳನ್ನು ತೋರಿಸಿ
gadgets ಲೇಬಲ್‌ನೊಂದಿಗೆ ಪೋಸ್ಟ್‌ಗಳನ್ನು ತೋರಿಸಲಾಗುತ್ತದೆ. ಎಲ್ಲಾ ಪೋಸ್ಟ್‌ಗಳನ್ನು ತೋರಿಸಿ

ಗುರುವಾರ, ಏಪ್ರಿಲ್ 20, 2006

BMW C.L.E.V.E.R. Concept

BMW just released official pictures of its co-developed three-wheeled, natural-gas powered micro-car called CLEVER (Compact Low Emission VEhicle for URban Transport). Although nothing official yet, but this concept that was funded by the European Commission (Fifth Framework Programme) could base the C1 successor, marrying the worlds of cars and motorcycles. Partners in the C.L.E.V.E.R project included:
  • BMW
  • Technical University of Berlin, Institute for Land and Sea Transport (TUB), Berlin, Germany
  • Cooper-Avon Tyres Ltd, Melksham, Great Britain
  • ARC Leichtmetall Kompetenzzentrum Ranshofen GmbH (LKR), Ranshofen, Austria
  • IFP
  • TAKATA-PETRI AG, Berlin, Germany
  • University of Bath, Department of Mechanical Engineering, Institute for Power Transmission and Motion Control, Bath, Great Britain
  • Universität für Bodenkultur Vienna, Institute of Transport, Vienna, Austria
  • WEH GmbH, Illertissen, Germany

The CLEVER concept, a €3.3 million (US$3.9 million) effort, is an enclosed two-seater that combines the safety of a microcar, and the maneuverability of a motorcycle, while being less polluting than other vehicles as it runs on compressed natural gas.


Its strengthened frame will protect the driver in a crash and the vehicle will have a top speed of approximately 50 mph. The 230cc BMW engine—modified by Institut Français du Pétrole (IFP) to use natural gas—produces 12.5 kW (17 hp) of power and maximum torque of 15.5 Nm at 6,300 rpm.

Fuel consumption is estimated to be 2.4 liters/100 km gasoline equivalent (98 mpg US), with 59.5 g/km of CO2 emissions. The compressed natural gas is stored in two removable gas bottles providing a range of 150 km (93 miles).

A problem with three-wheel vehicles with a symmetrical wheel layout is the tipping moment when cornering, which cannot be controlled at high speeds if the vehicle has a short wheelbase. To solve this problem the vehicle’s center of gravity can be moved towards the center of the corner—just as a motorcycle does when it corners.

The do this, the vehicle is a cabin tilter, with the system designed by the University of Bath. The cabin with the front wheel is connected to the power unit and the two rear wheels by a pivot bolt. The rotary movement of the cabin is produced by two hydraulic cylinders (actuators) that are installed between the cabin and the power unit. The actuators create the rotary angle of the cabin of +/-45° relative to the vertical power unit.

Technorati Tags: , , , , , , ,

ಗುರುವಾರ, ಜನವರಿ 26, 2006

Jeep Grand Cherokee Startech V6 3.0 CRD





262 HP FOR THE GRAND CHEROKEE 3.0 V6 CRD

PRESS RELEASE: The third generation of the Jeep Grand Cherokee has arrived and STARTECH presents an exclusive refinement program for the SUV. The extensive product lineup is characterized not only by its professional engineering and innovative design: All components also offer exceptional quality. For the 3.0 CRD model with common-rail turbodiesel engine STARTECH offers the new SD6 performance kit and a particulate filter.

Equipped with the new STARTECH SD6 tuning kit the V6 diesel produces a maximum power output of 262 hp / 193 kW compared to 218 hp / 160 kW for the non-tuned version. At the same time peak torque grows from 510 Nm to 580 Nm between 1,600 and 2,800 rpm. The added 44 hp / 33 kW are available for 1,590 Euros.

The STARTECH SD6 performance kit consists of an auxiliary computer control unit that can be installed in less than 30 minutes by authorized Chrysler dealer, thanks to the included wire harness and installation instructions.

With STARTECH SD6 tuning performance of the SUV improves noticeably: The sprint to 100 km/h is shortened from 9.2 seconds for the production car to 8.5 seconds for the STARTECH-tuned version. Top speed increases to 210 km/h.

To make the new Jeep Grand Cherokee 3.0 CRD even more environmentally friendly STARTECH offers a diesel particulate filter for vehicles with or without STARTECH engine tuning. The OEM-quality filter for the common-rail turbodiesel V6 is designed to be easily installed by any authorized Chrysler dealer. No modifications to the engine electronics are required. Both engine performance and fuel consumption remain at low production-car levels.

The STARTECH Monostar IV 9Jx20 light-alloy wheels are immediate eye catchers. The striking five-spoke wheels lend the Grand Cherokee an even more exclusive appearance. But that's not all: Shod with Pirelli tires in size 265/45 ZR 20 all-around they also give the SUV even more agile handling with further increased safety reserves.

The STARTECH suspension kit is specially calibrated to the use with sporty low-profile tires. It lowers the ride height by some 30 millimeters and further improves cornering ability due to the lowered center of gravity.

The exclusive looks of the American 4x4 is not only characterized by the large STARTECH 20-inch wheels: The STARTECH designer also created exterior components that are as attractive as they are functional.

The front of the new Grand Cherokee is customized with the strikingly styled STARTECH front apron. Its counterpart in the rear is a custom-shaped apron that features cutouts for the two characteristic oval chrome tailpipes of the STARTECH sport exhaust. The fully stainless-steel exhaust system is available for all engine variants of the Grand Cherokee. It produces not only a more sonorous exhaust note nut also optimizes power yield.

The sides of the five-door are upgraded with STARTECH side sills with integrated LED entrance lights. The lights are activated either with the standard keyless-entry remote or by pulling on a door handle. This STARTECH development makes entering and exiting the vehicle at night safer.

Exclusive interior design is yet another STARTECH specialty, which is also available for the new Jeep Grand Cherokee. The STARTECH accessories range from an ergonomically shaped sport steering wheel covered in the finest leather to polished stainless-steel sill plates with illuminated STARTECH logo.